standard push and pull props

Prop characterized by double action, working both compression and traction thanks to the particular sleeve that avoid the extraction of the prop when in traction.

The adjustable plates, mounted at the two ends, allow the best fasten of prop to the surface and the setup in the different angles.

Available both red painted and hot dip galvanized or electrolytic galvanized.

push and pull props with sleeve

DT2 1700 x 3000 mm (cod. 90-9016)
DT4 2100 x 3600 mm (cod. 90-9017)
DT6 2400 x 4100 mm (cod. 90-9018)
DT8 2600 x 4500 mm (cod. 90-9019)
LIGHT1 1000 X 1800 mm (cod. 90-7180)
LIGHT2 1700 x 3000 mm (cod. 90-7300)
LIGHT3 2000 x 3600 mm (cod. 90-7350)
LIGHT4 2200 x 4000 mm (cod. 90-7410)
LIGHT5 2400 x 4500 mm (cod. 90-7450)
LIGHT6 3000 x 5000 mm (cod. 90-7500)

heavy duty push and pull props

The heavy duty push and pull prop, thanks to the open thread and thickness, guarantees superior loads unlike the push and pull prop with sleeve. Available both red painted and hot dip galvanized or electrolytic galvanized.

PUSH AND PULL PROPS WITH SINGLE NUT

SNUT1 1000 x 1510 mm (cod. 90-7601)
SNUT2 1800 x 3000 mm (cod. 90-7602)
SNUT3 2150 x 3400 mm (cod. 90-7603)
SNUT4 2100 x 3650 mm (cod. 90-7604)
SNUT5 2770 x 5000 mm (cod. 90-7605)

PUSH AND PULL PROPS WITH DOUBLE NUT

DNUT1 1700 x 3000 mm (cod. 90-7606)
DNUT2 2100 x 4200 mm (cod. 90-7607)
DNUT3 3000 x 5400 mm (cod. 90-7608)
DNUT4 3550 x 5900 mm (cod. 90-7609)

TRIANGULAR PUSH AND PULL PROPS

TRPUSH1 1000 x 1510 + 2100 x 3650 mm (cod. 90-7610)
TRPUSH2 2100 x 3650 + 2770 x 5000 mm (cod. 90-7611)

Comipont S.p.A.

via Nicolò Tartaglia, 14

25024 Porzano di Leno, Brescia, Italy

amministrazione@pec.comipont.it

Partita I.V.A. 00664730983

 

C.F. 01917730176

CCIAA BS 278405

Trib. BS Reg. Soc 26542

Cap. Soc. i.v. €. 568.000,00

Privacy Disclaimer

©2016 Comipont S.p.A.

TFS Agency Web Design