COMIPONT SICURPONT H105
SICURPONT H 105 has been designed and manufactured to guarantee a safe working place and to reduce assembly time with simple and effective solutions in accordance with the European regulation EN12810.
Frames come with connecting pins that turn downwards for fast and practical connection.
The effort required to lift these frames is minimized owing to the short distances between the transversal ledgers and the tops of the standards. The guardrail frames are fitted on both sides with two different connecting pins. The long ones connect the guardrails to the standards and the short ones fasten them. These connecting pins allow fast and easy assembly without the need of diagonal braces. Longitudinal tubes and head guardrails are connected to the frames from the ground upwards providing safe access to the protected tiers above. In this way workers can work without harnesses and move more freely. These guardrails are extremely easy to manage and can be assembled rapidly due to their particular shape and lightweight. The anti- uncoupling fastener, consisting of an axial connecting pin, guarantees against accidental guardrail dislodgement and allows the frames to be assembled and dismantled by only one person.
Prefabricated frame scaffolding with 250x70 cm deck space between frames. Both painted and hot-dip galvanised versions are available.
This scaffolding is particularly indicated for building and industrial maintenance.
Designed for loads up to 150 daN/m2, it comes with hot-dip galvanised metal boards that have a structural function with corresponding safety toeboards, hatch decks with drop-down stairs, end guardrails, gravel guards, 100 and 200 cm guardrail tubes and hot-dip galvanised, adjustable base plates. The 70x250 cm scaffolding is the first to be integrated and can be combined with Sicurpont H 105 using the same components, thus favouring building-site economy.
Prefabricated frame scaffolding with bush coupling designed for loads up to 300 daN/m2, with 180/250x 105 cm deck spaces between frames. Both painted and hot-dip galvanized versions are available. This scaffolding is particularly indicated for construction and maintenance in the industrial and building sectors. It enables to solve any problem on a work site. Carriage entrance frame for openings up to 500 cm in width, with narrow bottom frame to reduce surface area occupancy. External brackets for suspended and unloading platforms are designed to integrate with the modular system base. This scaffolding is complete with hot-dip galvanized metal planks that have a structural function, with corresponding safety toeboards, hatch decks with drop-down stairs, side guardrails, gravel guards, 100 and 200 cm guardrail standards and adjustable ground base plates.
Prefabricated frame scaffolding with bush coupling, designed for loads up to 300 daN/m2 with deck space between frames of 1050 and 1800 cm in length by 1050 cm in width.
Comipont 2 scaffolding with ledgers and diagonals comes with metal planks that have a structural function. This scaffolding is particularly indicated for maintenance and construction work. Its wide range of accessories enables to solve any kind of problems on jobsites with its carriage entrance frames for openings up to 2600 mm, narrow bottom frames with upper frame widening to reduce surface area occupancy and its external brackets for suspended and unloading platforms on different levels of the building. The whole system is complete with hot-dip galvanised metal planks with safety toe-boards, hatch decks with drop-down stairs, side guardrails, gravel guards, 100 and 200 cm top guardrail standards and galvanised adjustable ground base plates.
COMIPONT 105x180 WITH PIN COUPLING
Prefabricated scaffolding frame with pin couplings is designed to support a load up to 300 daN/m2 with a 180x105 cm deck space between frames. This scaffolding, including ledgers and diagonals, comes with metal planks that have a structural function and is particularly indicated for construction and maintenance work. Its wide range of accessories enable to solve any problem arising on a work site as it has carriage entrance frames for openings up to 360 cm with narrow base frames with upper frame widening to reduce surface area occupancy and external brackets for suspended and unloading platforms on different levels of the building.
The system is complete with hot-dip galvanized metal planks with corresponding safety toeboards, hatch decks with drop-down stairs, side guardrails, gravel guards, 100 and 200 cm top guardrail standards and adjustable base plates.
MULTIDIRECTIONAL SCAFFOLDING COMIPONT 3
COMIPONT 3 is a modular system for the realization both of scaffolding and structures in general. It can be employed for construction, maintenance and restoration work of buildings including those with difficult architectural styles. It is flexible, fast and easy to assemble.
It combines the typical performance of frame scaffolding with the flexibility and universality of tubes and couplers. The way Multidirectional Scaffolding is typically employed involves innovative assembly typologies in respect to the traditional façade structural layout. The strong point of COMIPONT 3 is its modularity: a great number of combinations are possible with a 100/250x111* cm deck space between frames. This scaffolding is entirely hot-dip galvanized to guarantee long-lasting maximum protection. Its employment ranges from the building industry to the industrial, shipyard and airport sectors.
It can be connected to frame scaffolding for the realization of supporting towers with high load bearing capacity. It is ideal for the restoration of tower constructions of any section and height.
It is perfect for maintenance and renovation of churches, monuments, historical buildings and archaeological sites and where a highly flexible scaffold configuration is needed such as for bridges and viaducts with elevated or swaying structures.
TUBE AND COUPLER SCAFFOLDING
The tube and coupler system, the precursor of all scaffolding systems, remains the most low cost solution for maintenance and renovation of complex architectural structures even in a highly deteriorated state. Owing to its great versatility it can be employed anywhere from houses to industrial structures.
This scaffolding system is typically employed in building restorations, as a propping structure, and in bracing and reinforcing unsafe buildings. The tube and coupler scaffolding system remains the fastest and most economic solution acknowledged by Ministerial Authorizations as it connects and integrates with frame scaffolding for realizing special structures or for backing up base modules.
The 48.3 mm diameter and 3.2 mm thick tubes, with standard lengths ranging from 0.50 m to 6.0 m are available both in the painted and, on request, in the galvanised versions. The base module, for building and maintenance work, has a 180/250x110 cm deck space between frames, with plywood or metal planks for treading floors.
Going up and down ladders through hatch decks of the scaffolding system can really be inconvenient at times. This is why the multidirectional scaffolding system offers the possibility of arranging aligned or multilevel stairway towers that can be connected both internally to components of multidirectional scaffolds or externally to the classic frame scaffolding system. The horizontal measurement of the structure is 150x200 cm with 2 meters in height between each tier. The aluminum access stairway is 61 cm wide. The ergonomic handrails follow the inclination of the stairway as do the internal handrails assembled on the ramp itself.